whatsapp: 0086-18615575385
whatsapp: 0086-13668821631

Sediment Transport Demonstration Channel Didactic Equipment Vocational Training Equipment Applied Hydraulics & Hydrology

Item No.: S8-MKII
Sediment Transport Demonstration Channel Didactic Equipment Vocational Training Equipment Applied Hydraulics & Hydrology
Description
S8-MKII Sediment Transport Demonstration Channel Didactic Equipment Vocational Training Equipment Applied Hydraulics & Hydrology

DESCRIPTION
The Sediment Transport Demonstration Channel enables the demonstration of the full range of bedforms that arise in a mobile bed as the flow and/or slope are increased.
The channel can be used to perform most of the experiments and demonstrations usually undertaken in much larger laboratory flumes, but at a much lower cost and without the need for technician back up.
The equipment is portable and therefore may be used in the classroom as well as in the laboratory. This demonstration flume can play a useful role in any course concerning the mechanics of open channel flow and sediment transport, including those in departments of civil engineering, geology and physical geography.
The unit consists of an inclinable channel mounted on a frame, together with a discharge tank and recirculating pump. To commence a demonstration, sand is placed evenly along the channel bed, between the inlet tank and the overfall discharge weir. Water is circulated around the system at one of the three selectable flow rates. The channel slope is adjusted by means of a fine screw jack to which an accurate slope indicator is attached. The channel sides are transparent in order that bed profile changes can be observed and a section of one side is provided with graphical grid markings to permit quantitative assessments to be made of bedform dynamics.
A water level gauge is supplied to measure the head over the channel discharge weir to deduce flow rates from a user generated calibration chart.
Solid models of a bridge pier and an undershot weir are provided to demonstrate the scour effects on river beds of man-made structures.


TECHNICAL SPECIFICATIONS
CHANNEL WORKING SECTION
Length: 1.55m
Width: 0.78m
Depth: 0.11m
DISCHARGE RATE
Three fixed flow rates between 0.2 and 0.6 litres/sec, selected by switch on pump
Slope: 0 to 100%
Sediment diameter: 0.1 to 0.3mm
Weight of sand supplied: 15Kg
WEIGHT (INCLUDING SAND AND WATER)
S8-MKII-A: 74Kg
S8-MKII-B: 78Kg
S8-MKII-G: 74Kg